Water Damage Restoration Process

Water damage restoration is a complicated task requiring a variety of techniques and equipment to ensure the work is done properly. Depending on the extent and severity of the incident, different measures are taken to drain the water and to fix any polluted areas. Today , we’re going to continue from our previous article and go over the different things typically done on a water damage job as well as the scope of the equipment used. Have a look at Water Damage Restoration San Diego-Risk Free Serv.

The basic steps to every job of repairing water harm can be broken down as follows:

  • Remove Storm Water
  • Maping of humidity
  • Inspection and removal of moulds
  • Air Drying techniques

Removing Storm Water

Removing the water source is the first significant step on any restoration of water damage. Upon arrival on stage, professional technicians should have a variety of equipment at their disposal. Portable submergible water pumps are usually used to pump out accumulated water in structures. These pumps have a high water-extraction threshold and can usually dry out a whole submerged area in a short time, which is essential to stop the spread of damage.

Maping in moisture

Moisture mapping requires the use of sensing devices to produce an estimated chart for the amounts of moisture on your land. Infrared is one of the most common methods used to get accurate readings, and properly trained technicians typically take digital photographs of high quality as well as assess the extent of the damage. This step is crucial to get an idea of how bad the damage to the water could be and to take preliminary steps to prevent mold growth.

Inspection and replacement of moulds

If left unaddressed, the residual water may cause mold damage. Water damage professionals will use special detergents that sterilize the area and render mold growth conditions unfavorable. In addition, some restauration firms may use deodorization and ventilation as part of the process to eliminate any lingering odors and contaminants in the air.

Water-drying methods

These are some of the most common water drying techniques employed by professionals certified by the IICRC. Each technique is employed according to the situation ‘s severity.

Wind Changes

Air movers also known as evaporators help the drying process by controlling humidity in a region and encouraging air circulation. This helps in a wide-ranging way by removing liquids from porous materials-carpet, wood, drywall, plaster and more-leaving specialized equipment to the more difficult to try.

Dehumidifiers / Desiccant Dampening

Dehumidifiers remove the moisture from the air so it is possible to extract lingering water from the area. This may be loosely classified under refrigerant dehumidifiers and dehumidifiers with desiccants.

Refrigerant dehumidifiers work according to the principle of refrigerating the surrounding air. When this occurs, the air loses its ability to hold water and creates condensation on the equipment’s cooling coils. High-grade dehumidifiers function like a stronger clone of commercial dehumidifiers, taking the extra humidity out of the air easily.