Garage Door Repair – 5 Simple Things to Check

Garage door repair can often be performed by the proprietor himself. There are at least 5 simple things to test, before a specialist is called. Some repairs are exceedingly simple. For example, a stiff or squeaky door only requires good cleaning and lubrication. Other repairs, such as fixing a torsional spring, are extremely dangerous and require professional assistance. Learn more about Some Things To Know About Garage Door Repair – 101ApartmentforRent.com.

When continuing with the repair, make sure that your garage door opener is unplugged, so that you do not get an electric shock when fixing your garage door. Most likely you will be standing on a ladder, which is a very bad place to get an electrical shock, as you may also slip off the ladder. When working with power tools, remember to wear safety glasses too.

Here is a list of things to test before you call for your garage door repair professional:

  1. Check Metal Tracks for Damages This simple tip to repair garage doors can often solve the problem very quickly. The metal tracks can often have bumps or dents. If you notice any such damages, place a wood block and a hammer on the broken part of the track to straighten the line.
  2. Check the Tracks Alignment If the tracks are not well aligned, they can cause the door to fail to work. The tracks don’t always have to be unscrewed; you can just try to loosen the bolts or screws and gently tap the tracks into place. Use a level to manage track alignment. With your garage door repair, matched tracks will let you do it in no time.
  3. Clean and Dry the Tracks Although it may sound obvious, hardened dirt and old lubricant may be the cause of the sticking in the garage door. In this case, fixing your garage door may consist of simply cleaning the tracks and then drying them. Standard cleaners may be used to clean the tracks.
  4. Lubricate the Tracks and the Rollers Merely lubricating both the tracks and the rollers, will solve the problem and finish fixing your garage door in no time. You can use a spray lubricant or a silicon spray for lubrication. Lubricating the tracks after washing them probably is better. Each movable component would actually benefit from lubrication.
  5. Over time, tightening the Loose Bolts and Screws bolts and screws appear to become loose. Seek to check all the screws and bolts that are involved in your door opening / closing process. Often, just tightening them could solve the whole problem. If you can’t secure the screws, as the holes themselves have become loose, then you can fill the holes with a “wood filler” or bits of natural wood.
Share

You may also like...